1 Piece Tire Pressure Sensor TPMS 40700-3AN0D For Nissian NV Versa Versa Note

Description

1 Piece Tire Pressure Sensor TPMS 40700-3AN0D For Nissian NV Versa Versa Note
Note1:
Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.
Note2:
【No sensor programming Required】
:
The vehicle protocols are already installed on the sensor so programming is not necessary.
The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scan tool or "re-learning".
Simplified Relearn : OBDII required .
After a tire rotation or tire replacement, the system will relearn itself under normal driving conditions. A properly formatted scan tool is required to learn new sensor IDs when replacing sensors.
Installation of TPMS is recommended to be performed only by trained professionals.
SPECIFICATION :
Part Number ：
40700-3AN0D
Battery Life:
ABOUT 5YEAR
Operating Frequency:
315MHz
PACKAGE CONTENT :
1 Piece TPMS SENSOR
COMPREHENSIVE VEHICLE COVERAGE
Fits: See compatibility guide and notes below
Nissan NV 2017-2019
Nissan Versa 2016-2019
Nissan Versa Note 2016-2019
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.