-40%
10MΩ Oscilloscope Probe Accessory Oscilloscope Parts Passive Probe Replacement
10MΩ Oscilloscope Probe Accessory Oscilloscope Parts Passive Probe Replacement
10MΩ Oscilloscope Probe Accessory Oscilloscope Parts Passive Probe Replacement
10MΩ Oscilloscope Probe Accessory Oscilloscope Parts Passive Probe Replacement
10MΩ Oscilloscope Probe Accessory Oscilloscope Parts Passive Probe Replacement

10MΩ Oscilloscope Probe Accessory Oscilloscope Parts Passive Probe Replacement

$ 43.1

Availability: 10 in stock
  • Condition: New
  • Bandwidth: DC 100 MHz
  • Input resistance: 10MΩ±1.5%
  • Package Contents: 1* Oscilloscope probe
  • Restocking Fee: No
  • Return shipping will be paid by: Buyer
  • Propagation delay: ~6.1 ns
  • MPN: Does Not Apply
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Maximum input voltage: 300 VRMS CAT II
  • Brand: Unbranded
  • Probe cable length: 1.3 m (4.2 ft)
  • Item must be returned within: 30 Days

    Description

    Product Description
    10MΩ Oscilloscope Probe Accessory Oscilloscope Parts Passive Probe Replacement
    Product description:
    1. Passive probes (TPP) provide analog bandwidths up to 1 GHz and capacitive loads as low as 4 pF.
    2. The extremely low capacitive load limits the adverse effects on the circuit, and it is more tolerant of longer ground leads.
    3. With the wide bandwidth of the probe, you can see the high frequency components in the signal, which is essential for high-speed applications.
    4. Oscilloscope compatibility
    5. Passive voltage probes provide a low-cost universal detection solution for a wide range of applications. These probes are designed for Tektronix MDO3000, MDO4000, MSO5000, DPO5000, 5 series and 6 series oscilloscopes.
    Product specifications:
    Bandwidth: DC 100 MHz
    Rise time: <3.5 ns (typical value)
    Compensation range: TPP01008 pF~18 pFTPP010115 pF~25 pF
    Input resistance: 10MΩ±1.5%
    Input capacitance: <12 pF (typical value)
    Propagation delay: ~6.1 ns
    Maximum input voltage: 300 VRMS CAT II
    Probe cable length: 1.3 m (4.2 ft)
    temperature range
    operating
    -10°C to +55°C (14°F to 131°F)
    Not working
    -51°C to +71°C (-60°F to 160°F)
    The relative humidity (%RH) in working and non-working state is 5% to 95% of 30°C (86°F) at most, and at +55°C (131°F) above +30°C (86°F) 5% to 65% RH)
    Package list:
    1*Oscilloscope probe
    Note:
    1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
    2.Please allow slight manual measurement deviation for the data.
    Payment
    We accept payment via Paypal only.
    Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
    Delivery details
    We only
    ship to confirmed Paypal addresses.
    Please comfirm that your paypal address is in line with your shipping address.
    Please kindly note that
    the c
    ombined shipping
    is not provided
    because the shipping fee is calculated by weight. Also, the each additional item means
    exactly
    the the same color and size.
    It takes about
    7
    -15 working days to US; about 10-30 working days to other countries.
    Transit time may be a little delayed because of the
    bad
    weather and customs
    inspection
    . If you
    do
    not receive your
    item
    within 30 working days since payment finished, please contact us immediately for further assistance.
    Contact us
    We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
    p
    lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
    working hours.