4PCS TIRE PRESSURE SENSOR TPMS 52940-J7000 for 2019 Kia Forte Ceed 433MHz

Description

4PCS TIRE PRESSURE SENSOR TPMS 52940-J7000 for 2019 Kia Forte Ceed 433MHz
Note1:
Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.
Note2:
【No sensor programming Required】
: The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle.
Simplified Relearn :
OBD-relearn VERSION.
Installation of TPMS is recommended to be performed only by trained professionals.
SPECIFICATION :
Manufacture Part Number ：
52940-J7000, PMV-CH15
Battery Life:
ABOUT 5YEAR
Operating Frequency:
433MHz
PACKAGE CONTENT :
4PCS TPMS SENSOR
COMPREHENSIVE VEHICLE COVERAGE
For Kia
For Forte 2019 with factory original wheel Rims
For Cerato 2019 with factory original wheel Rims
For Ceed 2019 (2018.05+ ) with factory original wheel Rims
Installation Process
1. Loosen the tire: Remove the valve cap and core and deflate the tire.
2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.