Brightwater Wireless TPMS & Tire Temp Pressure Sensor Kit CAN bus for Motec Aim

Description

Brightwater Motorsports Racing Wireless TPMS & Tire Temp Pressure Sensor Kit
TPMS Features
Lightweight sensors (20g) and receiver
Connection output for CAN 2.0A up to 1Mbps (default)
Pressure resolution 15.7mbar
Pressure accuracy +/- 20mbar
Automatic learning functions for sensor serial numbers and wheel location
Any number of sensors can be added to the system
The standard kit comprises:
4 x Sensors
Wiring harness
Receiver
The kit is compatible with competition and race car applications that utilise 1Mbit CAN. (Other Baud rates can be requested.)
This is the established industry standard for professional suppliers of ECUs, dashboards and data loggers within the motorsport and other automotive sectors.
The new Brightwater Technologies TPMS range has been launched to offer a previously unavailable solution for motorsport applications.
Additional or replacement sensors can be purchased. Any of the sensor serial numbers can be set for any wheel location. The location can be changed as required.
The sensor data for each of the 4 corners of the car have individual CAN IDs. The default CAN IDs can be changed to suit your installation.
Measured sensor parameters:
MEASUREMENT / PARAMETER / NOTES
Location / 0x01-FL,0x02-FR,0x03-RL,0x04-RR
Pressure / 0x0100=256kPa
Temperature / 0x20=32°C
Sensor Voltage / 0x21=3.3V (1 decimal place)
Alarm: / Puncture 0x01=Tyre deflating
Alarm: / Sensor Failure 0x20=Sensor failure or out of reception
Sensor specifications:
Sensor pressure measurement range 0-8000 mbar
High frequency modulation mode FSK
Sensor temperature measurement range -40° C to 125°C
Sensor temperature resolution 1°C
Sealing IP67
Battery lifespan Min 2 race seasons
RF frequency 433.92MHz
High frequency emission power <8dBm (50ohms)