LIGHTNING STRIKE (BOLT) SIMULATOR KIT -DIY Project -for Model RR & Diorama #24

Description

1 Kit  To Make a DIY Lightning Strike (Bolt) Simulator Module for Special Effects
Kits contains all electronic components for the module (see photo 1 to 3)
Has it's own 12Vdc on-board regulator
Includes 1 Meter EL-Wire with Inverter (see photo #3)
Illustrated Assembly instructions and Tips are also included with this Kit
Please Note:  This kit does not sync with Arduino Sound Effects System.
for Model RR Applications and other Dioramas
Great for scenes or dioramas where sky lightning can be used to animate the scene.  This module uses oscillators of
different
frequencies to
create
intermittent lightning strikes using an EL-Wire.
The module operates at 12Vdc and has an on-board voltage regulator.
(Completed PCB shown in 4th Photo)
Soldering the components to the printed Circuit Board requires good soldering skills.  See photo #4 of completed circuit board.  I rate this kit at an Intermediate Skill Level.
You can now pick the sound modules that best match your scenes!
See my other listings for additional MINI SOUND EFFECT MODULES:
Mill & Mines
Logging
Wild West
Old Time Industry
1950-60's City with Wharf
Western-1
Western-2
Generic Landscape
Generic Farm
1950-60's Small Town
1900's Factories
Seashore / Harbor
also see the SIGHT & SOUND MODULES:
Thunder 'n Lightning
and other ANIMATION MODULES and KITS:
Arc Welder Kit
Flickering Fire Light and Glowing Embers
Random Building Lights
Model Railroading at NIGHT Master Set
Lightning Flash Kit
Lightning Strike Kit
Smoke Generator Kits
Vehicle Light Kits
CD Turnout Control Kit
Add
ACTION
and
SOUND
to bring your scenes to LIFE!
This is a one-of-a-kind item!
BUY NOW!
Item ships next business day via First Class Mail.
I will combine shipping whenever possible.
Kit Includes (everything seen in photo 1):
8pcs 1N4148 Fast Switching Diodes
1pc 14-pin IC Socket
1pc 1Meg Trim Pot
1pc 20K Trim Pot
1pc 1Meg 1/4W Resistor
3pcs 100K 1/4W Resistors
1pc 68K 1/4W Resistor
2pcs 47K 1/4W Resistors
1pc 1.5K 1/4W Resistor
1pc 8.5x4.5cm Printed Circuit Board
1pc CD40106 Hex Schmitt Trigger IC
1pc BD679 NPN Darlington Transistor
1pc Heat Sink and Hardware
1pc 1K 1/2W Resistor
4pcs 2.2uF 25-50V Electrolytic Capacitors
1pc 3.3uF 25-50V Electrolytic Capacitor
1pc 5mm Orange LED
1pc 1N4007 Silicon Diode
1pc 12V 1W Zener Diode
1pc BC547 NPN Transistor
1pc 470 ohm 1/2W Resistor
1pc 22uF 16-25V Electrolytic Capacitor
1pc 100uF 25-50V Electrolytic Capacitor
1pc 470uF 25V Electrolytic Capacitor
2pcs 2-Screw Terminals
1pc 1 Meter Bluish-White EL-Wire with Inverter
Illustrated Assembly Instructions
You Supply:
Power source 12 to 15V
22AWG or 24AWG wires for jumpers and 18 to 20AWG wiring for connecting the lighting strip
Tools for soldering
Application:
This module produces simulated lightning strikes that can be used in conjunction with your own sound effects and can be controlled by complex sequencing circuits or a simple push-button switch or timing circuit.
Check out my
other items
!