PlowSlick - slippery snow plow paint coating. Plow Slick in Red, Yellow or Clear

Description

OVER 100,000 KITS SOLD
Plow-Slick can be used on - Snow Plows, Lawnmowers, Dump Beds, Excavator Buckets, Air Boats, Snowmobiles, Quads, Sleds, Metal Roofs, Mower Decks, Dumpsters, all metals and plastics.
Is Plow-Slick a lubricant?
NO, Plow-Slick is NOT a silicone spray, graphite spray, Teflon® spray or plow wax but an advanced, 2-part, non-stick, slippery, polymer coating that cures on your snowplow. It will provide an unbelievably slick non-stick finish that can last an entire snowplowing season.
Is Plow-Slick the same as silicone, Teflon
®
or Pam
®
?
NO, not even remotely close. Plow-Slick is the ONLY one-time per season, non-stick, engineered snowplow coating on the market today!  In fact, Plow-Slick is so slick and slippery, it will put any other snowplow paint or coating to shame!
Why is Plow-Slick so slippery?
Plow-Slick is extremely non-stick, slick and slippery because it chemically bonds to your snowplow and produces the hardest, slickest surface available. The finish is completely resistant to salt, snow, ice and grime and keeps your expensive plow working
BETTER
than new.
Do you have to keep applying Plow-Slick?
NO, because Plow-Slick is an ultra-slick, industrial snowplow coating, only 1 application per plowing season is needed for incredible, non-stick performance!
How long does it take to apply Plow-Slick?
Plow-Slick only takes about 30 minutes to apply on a clean plow and then it needs to dry for 48 hours.  After that, your plow will have a diamond-hard slippery finish that NO plow wax, silicon spray or Teflon® spray can provide.
Can Plow-Slick be applied in cool temperatures?
YES. once mixed, Plow-Slick will dry at temperatures in the upper 30's and still give you the ultra-slick and slippery finish that you and your snowplow will love. This makes using Plow-Slick a very easy application that can be done in any garage.
How is Plow-Slick applied?
Plow-Slick can be brushed, rolled or sprayed on your plow, dump box or truck bed. We mostly recommend using a non-shed 1/4" nap roller, and brush, to apply the super-slick coating. You can even use an automotive type (or Wagner) paint sprayer.
Do I need to spray any lubricants on the Plow-Slick coating?
NO, actually snowplow lubricants can attract dirt and should
NOT
be used on the super-slick, non-stick Plow-Slick coating.
Can Plow-Slick be applied to my shovels?
Absolutely, why not make a hard job much easier?
Plow-Slick is so slippery and non-stick that you will want to use it on every shovel you own. In fact, a 1-plow kit of Plow-Slick contains enough coating to cover a few shovels as well as your plow!
Can I use Plow-Slick in my dump box?
YES, Plow-Slick will repel snow, ice and salt build-up. from your dump box and makes the metal completely resistant to the corrosive damage caused from salt.
Plow-Slick has also been tested against corrosion from salt spray for over 5500 continuous hours with no signs of corrosion!
A One-Plow (12 ounce) Kit will cover one (8'6"- 10') plow on the front side if rolled on and will cover the front and back if sprayed. This equates to 40 square feet if rolled or 60 if sprayed.
Let dry for 48 hours at 45 degrees or warmer, and your good to go!
Plow-Slick is available in Safety Red, Safety Yellow or Clear and can be applied over all metals or plastics.
Quantity Discounts are available for Municipalities and large landscape contractors.