TPMS For Ford Reset Sensor Programming Training Reset Tool Tire Pressure Mointor

Description

Product Features
🚗
Specially designed for Ford series vehicles:
Ford TPMS relearning tool can be used to reset and activate tire pressure sensors
on any Ford, Mazda, Lincoln, and Mercury vehicles
with tire pressure sensor systems. Please check the applicable latest models in the product description.
🚗
Easy to Use:
Super TPMS19 TPMS activation tool with ease, faster operation, activates the in dividual TPMS sensors by pressing one button.
🚗
Replacement for P/N:
8C2Z1A203A, 8C2Z-1A203-A, 8C2T-1A203-AB,TPMS19.
🚗
Necessary repair tools:
After replacing the tires （summer and winter tires exchang）/ the tire sensor updated/ tire rotaion, you can use this Ford TPMS reset tool to reset tire sensor to turn off the TPMS warning light.
🚗
Super mini TPMS tool:
Portable
waterproof
Ford TPMS reset tool, you can put it in your pocket or toolbox and anywhere else, very convenient and easy to use.
How To Use
How to Train for Ford Tire Pressure Monitior Sensors TPMS?
1. Turn the ignition switch to the
OFF
position, then press and release the brake pedal.
2. Cycle the ignition switch from the OFF position to the RUN position for
3 times
, ending in the RUN position.
3. Press and release the brake pedal.
4. Turn the ignition switch to the OFF position.
5. Turn the ignition switch from the OFF position to the RUN position 3 times, ending in the RUN position.The horn will sound once and the TPMS indicator will flash if the training mode has been entered successfully.If equipped, the message center will display TRAIN LF TIRE.
6. Place the tire pressure monitor activation tool on the LEFT (Driver's Side) FRONT tire sidewall at the valve stem.Press and release the test button repeatedly on the TPMS Tool until the horn beeps.(It may take up to 6 seconds for the tool to activate the sensor, Leave the tool on the sidewall for the entire 6 seconds).The horn beeping indicates that the body control module has recognized the TPMS sensor.
7. Within
2 minutes
of the horn sounding confirming programming of the LF tire,place the TPMS tool on the RIGHT (Passenger's Side) FRONT tire sidewall at the valve stem and press the test button to activate the sensor.
8. Repeat
step 7
for RIGHT REAR followed by LEFT REAR tire in that order. The procedure is complete after the last tire has been trained.When training is complete, the message center (if equipped) will display TIRE TRAINING COMPLETE.For vehicles not equipped with a message center, successful completion of the training procedure is verified by turning the key to the OFF position without the horn sounding. If the horn beeps twice when the switch is turned to OFF the training procedure was not successful.
Others
This is direct fit for the vehicles below:
2007-2016 Ford F-150
2008-2016 Ford F-250 F-350 F-450 F-550 Super Duty
2010-2016 Ford Mustang
2007-2014 Ford Edge
2006-2016 Ford Escape
2008-2016 Ford Expedition
2006-2016 Ford Explorer
2008-2015 Ford Flex
2008-2016 Ford Taurus
2008-2016 Ford E-150 E-250 E-350 E-450 Econoline Vans
2008-2016 Ford Fiesta
2008-2016 Ford Focus
2008-2016 Ford Fusion
2008-2011 Ford Crown Victoria
2011-2016 Ford Transit Connect
2006-2011 Ford Ranger
2007-2016 Lincoln MKX
2007-2016 Lincoln MKT
2008-2016 Lincoln MKZ
2008-2016 Lincoln MKS
2008-2016 Lincoln Navigator
2008-2011 Lincoln Town Car
2007-2008 Lincoln Mark LT
2006-2010 Mercury Mountaineer
2006-2010 Mercury Monterey
2006-2011 Mercury Mariner
2006-2011 Mercuy Grand Marquis
2006-2011 Mercury Milan
Note
📍 If the vehicle or wheels/sensors have been stationary for more than 30 minutes, the sensors will go into a "sleep mode" to conserve battery power. It is necessary to wake them up by simply moving them or rolling the tires before they will communicate with the vehicle.
📍 The TPMS training procedure must be done on one vehicle at a time, in an area without radio frequency interference-at least 3 feet away from other vehicles equipped with TPMS sensors.
📍 Vehicles with different tire pressures front-rear like F-Series trucks and E-Series vans also require TPMS re-training after a tire rotation. Failure to train the sensors will cause the TPMS warning light to illuminate on the dash.
Product Specification
Applicable models
For Ford
For P/N
8C2Z1A203A, 8C2Z-1A203-A, 8C2T-1A203-AB,TPMS19
Item Weight
1.13 ounces
Package Dimensions
‎4.17 x 2.6 x 0.47 inches
Batteries
Lithium Metal batteries required
Package Included
🔧 1 x Tire Pressure Monitoring Sensor For Ford
Support & Share