Water Purification Solution NaCLO2 25% & HCL 4%

Description

Sodium Chlorite can purify water when there is no other drinking water available. It is useful in case of travel.
1 Bottle of 4oz / 120ml of Sodium Chlorite 25% (NaClO2)
1 Bottle of 4oz / 120ml of Hydrochloric Acid 4% (HCL)
·
Water purification and disinfection set consists of two components which are accorded to the guidelines of the drinking water regulations and compliant with the standards of the food industry
·
Classic 1:1 Activator Solution with a reaction time of only 30 seconds.
·
Component A: 25% Sodium Chlorite solution (120 ml) | Component B: Activator, Hydrochloric Acid 5% (120 ml)
Water Conditioner CLASSIC 1:1 Set with activator Our Water Conditioner Classic 1:1 consists of two components which are accorded to the guidelines of the drinking water regulations and compliant with the standards of the food industry. Adding components, A and B drop wise, results in developing the active substance chlorine dioxide. Both solutions are energized during the production. Due to this process a better structuring of the contained water molecules is created to add positive information for optimum availability and effectiveness as well as energetic high and low frequencies protecting against electro smog. One set Water Conditioner Classic 1:1 will disinfect up to 3600 liters of drinking water. Component A: 25% Sodium Chlorite solution (120 ml) Component B: Activator, Hydrochloric Acid 5% (120 ml) Simple blend in the ratio 1:1, 1 drop of each solution Activated after 30 seconds, color change from colorless to ochre Use drinking water disinfectant with care. Always read the label and production information before use.