-40%

*NEW* Set (4) TPMS Tire Pressure Sensor 28103FL000 For Subaru Impreza Crosstrek

$ 19.99

Availability: 45 in stock
  • Sensor Quantity: 4
  • Frequency: 433 MHz
  • Return shipping will be paid by: Buyer
  • Condition: New in bulk package.
  • Warranty: 1 Year
  • Returns Accepted: Returns Accepted
  • Modified Item: No
  • Custom Bundle: No
  • Item must be returned within: 30 Days
  • Brand: Unbranded
  • Restocking Fee: No
  • Refund will be given as: Money Back
  • Type: Tire Pressure Monitoring System (TPMS) Sensor
  • Interchange Part Number: 28103FL00A, 28103FL00B
  • Manufacturer Part Number: 28103FL000

    Description

    4 Tire Pressure Sensor TPMS 28103FL000 For Subaru Impreza Ascent Forester Legacy
    Note1:
    Pls Use the vehicle fitment we've provided within the body of the listing to confirm vehicle fitment.
    Note2:
    【No sensor programming Required】
    :
    The vehicle protocols are already installed on the sensor so programming is not necessary.
    The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,need activate them by scan tool or "re-learning".
    Simplified Relearn : OBDII required .
    A properly formatted scan tool is required to learn new sensor IDs when replacing sensors. After IDs have been registered via the OBD, leave ignition on, and activate all sensors using TPMS activation tool.
    Installation of TPMS is recommended to be performed only by trained professionals.
    SPECIFICATION :
    Part Number :
    28103FL000
    Battery Life:
    ABOUT 5YEAR
    Operating Frequency: 433
    MHz
    PACKAGE CONTENT :
    4 Piece TPMS SENSOR
    COMPREHENSIVE VEHICLE COVERAGE
    for Subaru:
    2019 Forester
    2018-2019 Legacy
    2018-2019 Outback
    2017-2019 Impreza
    2018-2019 Crosstrek
    2019 Ascent
    Installation Process
    1. Loosen the tire: Remove the valve cap and core and deflate the tire.
    2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
    3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
    4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.
    5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.